Adtech 4 Series, Руководство по обслуживанию

Страница: 74 / 155

ADTECH 4 series CNC System (maintainance Manual)
70
033
X diameter prog enable
034 default process plane
036
037
038
IP address
Subnet mask
Default gateway
0 : disable ,no need go home point before working
1: enable ,need go home before working.
Range : 0~1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
This parameter for lathe machine , no need edit it .
Range : G17,18,19
Unit :
Authority : Operation admin or higher
Default : G17
Effective time : Instant
Note :
Set the default work plane to XY or XZ; modify the default plane, so that
it no need to specify the modal plane value while programming, and write
plane related instructions directly in stead;
Range : 0~2
Unit :
Authority : Operation admin or higher
Default : 2
Effective time : Instant
Note : This parameter for lathe machine ,no need edit it .
Range :
Unit :
Authority : Operation admin or higher
Default : 192.168.0.123
255.255.255.0
192.168.0.1
Effective time :
Reboot
Note :
These parameter settings for communicating with PC software .
Used to configure Ethernet parameters, which shall comply with the
actual network settings, or else it can‘t be accessed normally.
After configured successfully, the user can perform the ping command
test on the PC of same network segment (same subnet mask) in the
T code form 035