Adtech 4 Series, Руководство по обслуживанию

Страница: 22 / 155

ADTECH 4 series CNC System (maintainance Manual)
18
Before using the tool setting gauge, you need to set the parameters. In [Coord] menu, press [set] to show
tool setting parameters. After that, press [Tcheck] in the setting interface to execute the tool setting gauge
program according to specified parameters.
The action sequence oftool setting gauge follows
➢
Return Z axis to mechanical home first, and then locate spindle to X, Y coordinates of the tool setting gauge;
➢
tool setting gauge start blowing
➢
Z axis moves down, and return when touches tool setting gauge sensor, moves down at lower speed for leaving the
sensor ,records the machine coordinates of Z axis when touches the sensor and import the Z coordinates to current
selected coordinate system;
➢
tool setting gauge stop blowing
➢
Z axis returns to home position.
4.7 Data settings
4.7.1 Tool compensation setting
The tool compensation parameters can be set as follow:
➢
Select the edit mode;
➢
In the main menu, press [Coord], and then press submenu [Exp] to enter tool compensation parameter setting
interface;
➢
Move cursor to select the parameter, enter the value and then press [EOB] to modify the parameter where the cursor
locates.

Caution
1:there aree two types for assignment ,direct assignment and incremental assignment. direct assign is that import data
directy to the specified parameter ,the incremental assignment is that the value which is input data plus the current
value will be imported to the parameter