Adtech 4 Series, Руководство по обслуживанию

Страница: 106 / 155

ADTECH 4 series CNC System (maintainance Manual)
102
Input check level 00--31
Input check level 32--63
037
038
039
040
Machine spi one speed
Machine spi two speed
Machine spi three speed
Machine spi four speed
001
…
049
Tool Checking signal in
…
X---C Servo En input
The 2
nd
spindle output commad is
Range : 1 ~ 1000000
Unit : RPM/MIN
Authority : Operation admin or higher
Default : 24000
Effective time : instant
Note : These parameters for lathe machine ,no need set it
Range : 1 ~ 24000
Unit : ms
Authority : Operation admin or higher
Default : 24000
Effective time : instant
Note : When the spindle execute stop command ,there is a delay for spindle
stop ,the delay time is this parameter setting .
11.7 Port configuration (P6.)
Range : 0 ~ 23
Unit :
Authority : Operation admin or higher
Default :
Effective time : instant
Note : Assign input or output for each functional ports ,the input or output ports
rang is 0—23 ,pls input the number directly ,and the input or output can
not be repeated
If you want to shield this functional prot ,pls input 8888,then press EOB
the setting will be
“
=========
”
041 Spindle stop delay(ms)
050
051