Adtech 4 Series, Руководство по обслуживанию

Страница: 94 / 155

ADTECH 4 series CNC System (maintainance Manual)
90
035
X pitch compensate En
Y pitch compensate En
Z pitch compensate En
4 pitch compensate En
B pitch compensate En
C pitch compensate En
037 X pitch com start pos(mm)
Ypitch com start pos(mm)
Z pitch com start pos(mm)
4 pitch com start pos(mm)
B pitch com start pos(mm)
Cpitch com start pos(mm)
Authority : Operation admin or higher
Default : 100
，
60
Effective time : instant
Note : Used to set the speed parameters of mechanical home
Range : On/ off
Unit :
Authority : Operation admin or higher
Default : Off
Effective time : instant
Note : make the pitch compensate enable or disable,EN means the pitch
compensate is effective ,off means the pitch compensate is ineffective
Range : 1
～
1000
Unit : mm
Authority : Operation admin or higher
Default : 10
Effective time : instant
Note : set pitch compensate spacing ,this setting for laser interferometer to
measure the pitch error the normal setting is 10mm
Range : -9999.999 ~ 9999.999
X axis pitch spacing(mm)
Y axis pitch spacing(mm)
Z axis pitch spacing(mm)
4 axis pitch spacing(mm)
B axis pitch spacing(mm)
C axis pitch spacing(mm)
036