Adtech 4 Series, Руководство по обслуживанию

Страница: 75 / 155

ADTECH 4 series CNC System (maintainance Manual)
71
041 feed speed setting En
042 enable of G00 Inp mode
intranet. The connection has error if the return overtimes. Please check
the physical connection.
The network environment requires independent NC network. Do not
connect to office network or Internet, because the broadcast in the
network and regular query of windows will block the network
communication of NC.
Range :
Unit :
Authority : Operation admin or higher
Default :
Effective time : Reboot
Note : 18.52.86.168.0.123
These parameter settings for communicating with PC software .
And it should be input the PC MAC address
Range : 10~200
Unit :
Authority : Operation admin or higher
Default : 20
Effective time : Instant
Note :
Pretreatment forward segments are used to set the segments of
pretreatment preview.
The larger this value is, the greater the operation is, and the longer the
waiting time before motion is.
During small segment interpolating, if this value is larger, the possibility
of waiting for operation during motion will become higher; the value is
set according to the actual processing effect.
If this value is smaller, the value is set according to the actual effect
because the forward data are insufficient and the speed can‘t be improved
during small segment interpolating.
If the P1.018 setting is speed 1 ,this parameter is invalid.
Range : 0~1
Unit :
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note :
This parameter is used to modify the interpolation speed in programming,
making F programming invalid.
Used for the cases that processing codes requires ignoring F-value.
Range : 0~1
Unit :
Authority : Operation admin or higher
Default : 0
Mac Addresss<●>
039
040 Pretreatment segments