Adtech 4 Series, Руководство по обслуживанию

Страница: 21 / 155

ADTECH 4 series CNC System (maintainance Manual)
17
➢
Select the edit mode;
➢
Select MPG or Jogl mode;
➢
Press [Coord] to enter coordinate system setting interface;
➢
Press the left/right arrow to move the cursor to select coordinate system;
➢
Press [HALVE] to enter centered interface;
➢
Move the tool to make its side blade touch the surface of round workpiece, and press [EOB] to record boundary point
1;
➢
Move the tool to make its side blade touch another point in the surface of the workpiece, and press [EOB] to record
boundary point 2;
➢
Move the tool to make its side blade touch another point in the surface of the workpiece, and press [EOB] to record
boundary point 3;
➢
Press [EOB] after recording all boundary points to calculate the coordinates of circle center and display in the result
section;
➢
If all are ok , press [EOB] again to return the result to specified coordinate system.
Arc centered checking
under the main menu, press [Monitor], [MDI] to enter the MDI interface, select edit mode, enter program
block G55G0X0Y0 (if coordinate system G55 is selected while tool setting), press [Start], [EOB], and the tool
moves to workpiece center automatically, indicating that three points arc centered properly.
The validation steps for other tool setting methods are same.
4.6.2 tool setting gauge
tool setting gauge principle:
The tool setting gauge uses external sensor to set the reference point for axis Z, which is similar to home.
After changing tool during machine working or changing tool manually, it will automatically check the Z value
of current workpiece‘s home.
tool setting gauge usage