Adtech 4 Series, Руководство по обслуживанию

Страница: 88 / 155

ADTECH 4 series CNC System (maintainance Manual)
84
021 X Round Setting<
●
>
Y Round Setting<
●
>
Z Round Setting<
●
>
4 Round Setting<
●
>
B Round Setting<
●
>
C Round Setting<
●
>
Note : Set the home sensor level ((it is suggested that using NPN type sensor)
1 is high level ,0 is low level .
Range : 0
～
9999999
Unit : pulse
Authority : Operation admin or higher
Default : 0
Effective time : reboot
Note : If the axis works as rotary (not linear, P2.026 settings is 0 ),then this
parameter will be changed automatic(there is an Arithmetic which base
on the parameters P2 001 P2.12 Setting )
Range : 0
～
6
Unit :
Authority : Operation admin or higher
Default : 1---6
Effective time : reboot
Note : At default mode, the actual number of every axis corresponds to the silk
screen number on the shell. If certain axis is abnormal, you can replace
the axis through this function. For example, set P2.022 X physial Assign
Num is 4 ,and 4 physial Assign Num<
●
> is 1, then, any operation to X
axis will be the operation to A axis pulse port on the shell.
0: no any axis (no pulse output)
1~6: corresponding to 1#---6# axis
These parameters can be set dual drive .one axis is master ,the other is
X physial Assign Num<
●
>
Y physial Assign Num<
●
>
Z physial Assign Num<
●
>
4 physial Assign Num<
●
>
B physial Assign Num<
●
>
C physial Assign Num<
●
>
022