Adtech 4 Series, Руководство по обслуживанию

Страница: 102 / 155

ADTECH 4 series CNC System (maintainance Manual)
98
Spindle assign port axis #
Range :
Unit :
Authority : Operation admin or higher
Default :
Effective time : Instant
Note : Servo spinde motor parameters are same as normal servo motor
parameters. If the spindle is controlled with servo port, you can set the
function according to normal axis parameters.
Range : 0
～
7
Unit :
Authority : Super user
Default : 0
Effective time : reboot
Note : 0 : it is analog output (
±
10V for controlling VFD)
1---6
：
corresponding to 1# -- 6# axis
7
：
servo spindle port, the servo spindle motor which is special for ATC
function
The default setting is 0 ,that means it is VFD control mode .if you want to
Spi.ECZ Home Enable
Spi.ECZ Elevel
Spi. Limit+ Enable
Spi. Limit- Enable
Spi.Limit Elevel
Spi.Pulse Mode
Spi.Pulse Logic Mode
Spi.HomeDect ELevel
Spi.ExtHome Check En
Spi.Round Setting
Spi.ZeroOffset(p)
PulseLogic Level
Rolling Display Usage
Spi.Max Acc(Kpps)
Spi.Ext HomeDir
Spi.Servo HomeDir
Spi.Home Speed(rpm)
Spi.Encoder Logic Dir
004
005
006
007
008
009
010
011
012
013
015
016
017
018
019
020
022
025
001