Adtech 4 Series, Руководство по обслуживанию

Страница: 80 / 155

ADTECH 4 series CNC System (maintainance Manual)
76
002
003
X FastSpeed(mm/min)
Y FastSpeed(mm/min)
Z FastSpeed(mm/min)
4 FastSpeed(mm/min)
B FastSpeed(mm/min)
C FastSpeed(mm/min)
XStartupSpeed(mm/min
YstartupSpeed(mm/min)
Range : 1--65535
Unit : none
Authority : Operation admin or higher
Default : 1
Effective time : Reboot
Note :
These settings For making sure the actual distance is same as the
programming distance,the formula as below
CMR/CMD =P/ (L×1000)
CMR: gear numerator
CMD: gear denominator
P: Pulses corresponding to one rotation of the motor encoder
L: Machine tool movement corresponding to one rotation of the motor
(mm)(pitch or others)
CMD/CMR is the pulse equivalent actually, i.e. the motion distance
corresponding to every pulse (unit: 0.001mm).
Ex 1: the motor encoder pulse is 5000 , and the machine moves 5mm
(pitch is 5mm)when the motor rotates one cycle,and there is no gear ratio
on this axis, then
CMR/CMD=5000/ (5*1000)=1/1
Then, CMR=1, CMD=1, the pulse equivalent is 0.001 p/mm
Ex 2: the motor encoder pulse is 5000, and the machine moves
10mm(pitch is 10mm)when the motor rotates one cycle,and there is no
gear ratio on this axis,
then CMR/CMD=5000/ (10*1000)=1/2
Then, CMR=1, CMD=2, the pulse equivalent is 0.001p/mm
Ex 3: the motor encoder pulse is 5000, and the machine moves
10mm(pitch is 10mm)when the motor rotates one cycle,and the gear ratio
is 1:2
then CMR/CMD=5000*2/ (10*1000)=1/1
Then, CMR=1, CMD=1, the pulse equivalent is 0.001 p/mm
Y Gear Numerator
Y Gear Denominator
Z Gear Numerator
Z Gear Denominator
4 Gear Numerator
4 Gear Denominator
B Gear Numerator
B Gear Denominator
CGear Numerator
C Gear Denominator