358 Parameters
User3 IO active
User set 3 has been selected by parameters
.
6
User4 IO active
User set 4 has been selected by parameters
.
7
Reserved
8…19
User1 backup
User set 1 has been saved or loaded.
20
User2 backup
User set 2 has been saved or loaded.
21
User3 backup
User set 3 has been saved or loaded.
22
User4 backup
User set 4 has been saved or loaded.
23
Enables the saving and restoring of up to four custom sets of
parameter settings.
The set that was in use before powering down the drive is in
use after the next power-up.
Notes:
• Some hardware configuration settings, such as I/O
extension module and fieldbus configuration parameters
(groups 14…16, 47, 50…58 and 92…93) are not included
in user parameter sets.
• Parameter changes made after loading a set are not
automatically stored – they must be saved using this
parameter.
• This parameter cannot be changed while the drive is
running
No action
Load or save operation complete; normal operation.
0
User set I/O mode
Load user parameter set using parameters
.
1
Load set 1
Load user parameter set 1.
2
Load set 2
Load user parameter set 2.
3
Load set 3
Load user parameter set 3.
4
Load set 4
Load user parameter set 4.
5
Save to set 1
Save user parameter set 1.
18
Save to set 2
Save user parameter set 2.
19
Save to set 3
Save user parameter set 3.
20
Save to set 4
Save user parameter set 4.
21
, selects the user parameter set together with
as follows:
Not selected
0.
0
Selected
1.
1
No.
Name/Value
Description
Def/FbEq16
Status of source
defined by par.
Status of source
defined by par.
User parameter
set selected
0
0
Set 1
1
0
Set 2
0
1
Set 3
1
1
Set 4
Содержание ACS560
