Parameters 317
Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter
(by default, 0.5
metric tons/MWh).
This parameter is read-only (see parameter
).
0.0
0.0…214748300.8
metric tons
Reduction in CO
2
emissions in metric tons.
1 = 1 metric
ton
Enables/disables the energy optimization function. The
function optimizes the motor flux so that total energy
consumption and motor noise level are reduced when the
drive operates below the nominal load. The total efficiency
(motor and drive) can be improved by 1…20% depending on
load torque and speed.
Disable
Energy optimization disabled.
0
Enable
Energy optimization enabled.
1
Defines energy tariff 1 (price of energy per kWh). Depending
on the setting of parameter
, either this
monetary savings are calculated.
Note:
Tariffs are read only at the instant of selection, and are
not applied retroactively.
5.000 INR
0.000…
4294966.296 units
Energy tariff 1.
-
Defines energy tariff 2 (price of energy per kWh).
See parameter
6.000 INR
0.000…
4294966.296 units
Energy tariff 2.
-
Selects (or defines a source that selects) which pre-defined
energy tariff is used.
0 =
Energy tariff 1
0.
0
Energy tariff 2
1.
1
DI1
Digital input DI1 (
, bit 0).
2
DI2
Digital input DI2 (
, bit 1).
3
DI3
Digital input DI3 (
, bit 2).
4
DI4
Digital input DI4 (
, bit 3).
5
DI5
Digital input DI5 (
, bit 4).
6
DI6
Digital input DI6 (
, bit 5).
7
). -
Selects the currency unit based on which the values of
parameters
are displayed.
INR
Displays the values of parameters
,
in Indian rupee.
100
EUR
Displays the values of parameters
,
in euro.
101
USD
Displays the values of parameters
,
in US dollars.
102
No.
Name/Value
Description
Def/FbEq16
Содержание ACS560
