ABB ACS150 series, Руководство пользователя

Страница: 80 / 173

79
Actual signals and parameters
Actual signals and parameters
What this chapter contains
The chapter describes the actual signals and parameters. It also contains a table of
the default values for the different macros.
Terms and abbreviations
Term Definition
Actual signal
Signal measured or calculated by the drive. Can be monitored by the user.
No user setting possible. Groups 01...04 contain actual signals.
Def Parameter default value
Parameter
A user-adjustable operation instruction of the drive. Groups 10...99 contain
parameters.
E Refers to types 01E- and 03E- with European parametrization
U Refers to types 01U- and 03U- with US parametrization
Default parameter values with different macros
When application macro is changed ( 9902 APPLIC MACRO), the software updates
the parameter values to their default values. The following table includes the
parameter default values for different macros. For other parameters, the default
values are the same for all macros (see section
Actual signals on page 84 ).
Index Name/
Selection
ABB
STANDARD
3-WIRE ALTERNATE MOTOR POT HAND/AUTO PID CONTROL
1001 EXT1
COMMANDS 2 = DI1,2 4 = DI1P,2P,3 9 = DI1F,2R 2 = DI1,2 2 = DI1,2 1 = DI1
1002 EXT2
COMMANDS 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL 21 = DI5,4 20 = DI5
1003 DIRECTION 3 = REQUEST 3 = REQUEST 3 = REQUEST 3 = REQUEST 3 = REQUEST 1 = FORWARD
1102 EXT1/EXT2
SEL 0 = EXT1 0 = EXT1 0 = EXT1 0 = EXT1 3 = DI3 2 = DI2
1103 REF1 SELECT 1 = AI1 1 = AI1 1 = AI1 12 =
DI3U,4D(NC) 1 = AI1 2 = POT
1106 REF2 SELECT 2 = POT 2 = POT 2 = POT 1 = AI1 2 = POT 19 = PID1OUT
1201 CONST
SPEED SEL 9 = DI3,4 10 = DI4,5 9 = DI3,4 5 = DI5 0 = NOT SEL 3 = DI3
1301 MINIMUM AI1 0.0% 0.0% 0.0% 0.0% 20.0% 20.0%
1601 RUN ENABLE 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL 4 = DI4
2201 ACC/DEC 1/2
SEL 5 = DI5 0 = NOT SEL 5 = DI5 0 = NOT SEL 0 = NOT SEL 0 = NOT SEL
9902 APPLIC
MACRO 1 = ABB
STANDARD 2 = 3-WIRE 3 =
ALTERNATE 4 = MOTOR
POT 5 = HAND/
AUTO 6 = PID
CONTROL