ABB ACS150 series, Руководство пользователя

Страница: 153 / 173

Technical data
152
Type
ACS150-
x = E/U
1
R
min
ohm
R
max
ohm
P
BRmax
Selection table by resistor type
CBR-V
Braking time
2)
kW hp 160 210 460 s
1-phase U
N
=
200…240 V
(200, 208, 220, 230, 240 V)
01x-02A4-2 70 390 0.37 0.5 90
01x-04A7-2 40 200 0.75 1 45
01x-06A7-2 40 130 1.1 1.5 28
01x-07A5-2 30 100 1.5 2 19
01x-09A8-2 30 70 2.2 3 14
3-phase U
N
=
200…240 V
(200, 208, 220, 230, 240 V)
03x-02A4-2 70 390 0.37 0.5 90
03x-03A5-2 70 260 0.55 0.75 60
03x-04A7-2 40 200 0.75 1 42
03x-06A7-2 40 130 1.1 1.5 29
03x-07A5-2 30 100 1.5 2 19
03x-09A8-2 30 70 2.2 3
14
3-phase U
N
=
380…480 V
(380, 400, 415, 440, 460, 480 V)
03x-01A2-4 200 1180 0.37 0.5 90
03x-01A9-4 175 800 0.55 0.75
90
03x-02A4-4 165 590 0.75 1 60
03x-03A3-4 150 400 1.1 1.5 37
03x-04A1-4 130 300 1.5 2 27
03x-05A6-4 100 200 2.2 3 17
03x-07A3-4 70 150 3.0 3 29
03x-08A8-4 70 110 4.0 5 20
1)
E=EMC filter connected (metal EMC filter screw installed),
U=EMC filter disconnected (plastic EMC filter screw installed), US
parametrization.
2)
Braking time = maximum allowed braking time in seconds at P
BRmax
every
120 seconds, at 40 °C ambient temperature.
00353783.xls J
Note: The brake resistors listed in the table are available in Europe. They do not apply to the USA. Contact
your local ABB representative for more information.
Symbols
R
min
= minimum allowed brake resistor that can be connected to the brake chopper
R
max
= maximum allowed brake resistor that allows R
max
P
BRmax
= maximum braking capacity of the drive, must exceed the desired braking power.
Ratings by resistor type CBR-V CBR-V CBR-V
160 210 460
Nominal power (W) 280 360 790
Resistance (ohm)
70 200 80
WARNING! Never use a brake resistor with a resistance below the minimum value
specified for the particular drive. The drive and the internal chopper are not able to
handle the overcurrent caused by the low resistance.