ABB ACS150 series, Руководство пользователя

Страница: 149 / 173

Technical data
148
Disposal The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors contain electrolyte, which is classified as
hazardous waste within the EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
Applicable standards
The drive complies with the following standards:
• IEC/EN 61800-5-1: 2003
Electrical, thermal and functional safety requirements for adjustable frequency a.c. power
drives
• IEC/EN 60204-1: 2006
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
• IEC/EN 61800-3: 2004
Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
• UL 508C
UL Standard for Safety, Power Conversion Equipment, third edition.
CE marking
See the type designation label for the valid markings of your drive.
A CE mark is attached to the drive to verify that the drive follows the provisions of the European Low
Voltage and EMC Directives.
Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical equipment used
within the European Union. The EMC product standard (EN 61800-3:2004) covers requirements stated
for drives. See section
Compliance with the EN 61800-3:2004 on page 148 .
Compliance with the EN 61800-3:2004
Definitions
EMC stands for E lectro m agnetic C ompatibility. It is the ability of electrical/electronic equipment to
operate without problems within an electromagnetic environment. Likewise, the equipment must not
disturb or interfere with any other product or system within its locality.
First environment includes establishments connected to a low-voltage network which supplies buildings
used for domestic purposes.
Second environment includes establishments connected to a network not directly supplying domestic
premises.
Drive of category C1: drive of rated voltage less than 1000 V, intended for use in the first environment.
Drive of category C2: drive of rated voltage less than 1000 V and intended to be installed and
commissioned only by a professional when used in the first environment.
Note: A professional is a person or organization having necessary skills in installing and/or
commissioning power drive systems, including their EMC aspects.