A&D AD-4410 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 82

A&D AD-4410 Скачать руководство пользователя страница 5

Page

3

AD-4410

1. Safety Precautions

For safe and correct usage, read the following precautions carefully before using the
indicator.

Grounding
Be sure to ground the AD-4410 when using it.
Do not use the same grounding wire that power-driven equipment such as motors or
inverters are using.
Accidents such as electrical shocks, fire, or malfunctions may occur if the instrument is not
grounded properly.

Using proper power cables
Be sure to use the provided power cable.
If you wish to use a cable other than the provided cable, be sure to use a cable matching
the voltage and current of the power source.
It may cause an accident such as electrical leakage or fire if a cable with insufficient
pressure-resistance is used.

Fuse replacement
A fuse is provided to protect against a short circuit and possible fire hazard.
The indicator is equipped with various protection circuits and the fuse should not burn out
under normal operations.
If the fuse burns out, the internal circuits may have been damaged by surges. Do not try to
replace the fuse. Contact the nearest A&D dealer.

Avoid water and moisture
The indicator is not water-resistant.
Securing the front panel to the control panel using the accessory panel mount packing will
provide the indicator with IP-65 protection.

Avoid an environment with flammable gases
Do not use the indicator in places where flammable gases are present.

Indicator overheat
To prevent the indicator from overheating, allow appropriate clearance between the
peripheral devices.
If the ambient temperature exceeds the specified operating temperature, use a fan to cool
the environment.

«
...
3
4
5
6
7
...
»

Содержание AD-4410



















































































Отзывы:

Нет отзывов