ZyXEL Communications Prestige 652, User Manual, Page: 51 / 521

Prestige 652 Series User’s Guide
Introducing the Web Configurator 2-3
Figure 2-2 Web Configurator SITE MAP Screen
Click the icon (located in the top right corner of most screens) to view
embedded help.
2.4 Resetting the Prestige
If you forget your password or cannot access the SMT menu, you will need to reload the factory-default
configuration file or use the
RESET button the back of the Prestige. Uploading this configuration file
replaces the current configuration file with the factory-default configuration file. This means that you will
lose all configurations that you had previously and the speed of the console port will be reset to the default of
9600bps with 8 data bit, no parity, one stop bit and flow control set to none. The password will be reset to
“1234”, also.
2.4.1 Using The Reset Button
Step 1. Make sure the SYS LED is on (not blinking).
Step 2. Press the RESET button for five seconds, and then release it. When the SYS LED begins to
blink, the defaults have been restored and the Prestige restarts
Wizard Setup
Navigation panel
Logout