ZyXEL Communications Prestige 652, User Manual, Page: 321 / 521

Prestige 652 Series User’s Guide
Remote Node Configuration 29-11
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM
traffic).
29.5.3 Advance Setup Options
In menu 11.1, select PPPoE in the Encapsulation field.
Figure 29-9 Menu 11.1 Remote Node Profile
Move the cursor to the Edit Advance Options field, press [SPACE BAR] to select Yes , then press
[ENTER]
to display Menu 11.8 – Advance Setup Options .
Figure 29-10 Menu 11.8 Advance Setup Options
The following table describes the fields in this menu.
Menu 11.8 - Advance Setup Options
PPPoE + PPPoE_Client_PC= No
Press ENTER to Confirm or ESC to Cancel:
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE
Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name=
Edit Advance Options= Yes
Incoming: Telco Option:
Rem Login= Allocated Budget(min)= 0
Rem Password= ******** Period(hr)= 0
Outgoing: Schedule Sets=
My Login= ? Nailed-Up Connection= No
My Password= ? Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 0
Press ENTER to Confirm or ESC to Cancel: