ZyXEL Communications Prestige 652, User Manual, Page: 422 / 521

Prestige 652 Series User’s Guide
41-4 IP Policy Routing
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Figure 41-3 Menu 25.1.1 IP Routing Policy
The following table describes the fields in this menu.
Table 41-2 Menu 25.1.1 IP Routing Policy
FIELD DESCRIPTION
Policy Set Name This is the policy set name assigned in Menu 25 – IP Routing Policy Setup .
Active Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to
deactivate the policy. Inactive policies are displayed with a minus sign “-“ in SMT
menu 25.
Criteria
IP Protocol IP layer 4 protocol, for example, UDP , TCP , ICMP , etc.
Type of Service Prioritize incoming network traffic by choosing from Don’t Care , Normal , Min
Delay , Max Thruput, Min Cost or Max Reliable .
Precedence Precedence value of the incoming packet. Press [SPACE BAR] and then [ENTER]
to select a value from
0 to 7 or Don’t Care .
Packet Length Type the length of incoming packets (in bytes). The operators in the Len Comp
(next field) apply to packets of this length.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal Packet length= 40
Precedence = 0 Len Comp= N/A
Source:
addr start= 1.1.1.1 end= 1.1.1.1
port start= 20 end= 20
Destination:
addr start= 2.2.2.2 end= 2.2.2.2
port start= 20 end= 20
Action= Matched
Gateway addr = 192.168.1.1 Log= No
Type of Service= Max Thruput
Precedence = 0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.