manualshive.com logo in svg

ZyXEL Communications Prestige 652, User Manual, Page: 272 / 521

Share
Download
ZyXEL Communications Prestige 652 User Manual Download Page 272

Prestige 652 Series User’s Guide 

23-4 

 

Introducing the SMT

 

Table 23-1 Main Menu Commands 

OPERATION KEYSTROKE 

DESCRIPTION 

Move down to 
another menu 

[ENTER] 

To move forward to a submenu, type in the number of the desired 
submenu and press [ENTER]. 

Move up to a 
previous menu 

[ESC] 

Press [ESC] to move back to the previous menu. 

Move to a “hidden” 
menu 

Press [SPACE 
BAR] to change 

No

 

to 

Yes 

then press 

[ENTER]. 

Fields beginning with “Edit” lead to hidden menus and have a 
default setting of 

No

. Press [SPACE BAR] once to change 

No

 to 

Yes

, then press [ENTER] to go to the  “hidden” menu. 

Move the cursor 

[ENTER] or 
[UP]/[DOWN] arrow 
keys. 

Within a menu, press [ENTER] to move to the next field. You can 
also use the [UP]/[DOWN] arrow keys to move to the previous 
and the next field, respectively. 

Entering 
information 

Type in or press 
[SPACE BAR], then 
press [ENTER].

 

You need to fill in two types of fields. The first requires you to type 
in the appropriate information. The second allows you to cycle 
through the available choices by pressing [SPACE BAR]. 

Required fields 

<

?

 > or 

ChangeMe

 

All fields with the symbol <?> must be filled in order to be able to 
save the new configuration. 

All fields with 

ChangeMe

 must not be left blank in order to be 

able to save the new configuration. 

N/A fields 

<N/A> 

Some of the fields in the SMT will show a <N/A>. This symbol 
refers to an option that is Not Applicable. 

Save your 
configuration 

[ENTER] 

Save your configuration by pressing [ENTER] at the message 
“Press ENTER to confirm or ESC to cancel”. Saving the data on 
the screen will take you, in most cases to the previous menu. 

Exit the SMT 

Type 99, then press 
[ENTER]. 

Type 99 at the main menu prompt and press [ENTER] to exit the 
SMT interface. 

 

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Reviews:

No comments