ZyXEL Communications Prestige 652 User Manual Download Page 249

Page: 249 / 521

Prestige 652 Series User’s Guide

Bandwidth Management

21-17

21.9.2 Bandwidth Management Statistics

Use the

Bandwidth Management Statistics

screen to view network performance information. Click the

Statistics

button in the

Class Setup

screen to open the

Statistics

screen.

Figure 21-10 Bandwidth Management Statistics

The following table describes the labels in this screen.

Table 21-6 Bandwidth Management Statistics

LABEL DESCRIPTION

Class Name

This field displays the name of the class the statistics page is showing.

Budget (kbps)

This field displays the amount of bandwidth allocated to the class.

Tx Packets

This field displays the total number of packets transmitted.

Tx Bytes

This field displays the total number of bytes transmitted.

Dropped
Packets

This field displays the total number of packets dropped.

Dropped Bytes

This field displays the total number of bytes dropped.

Bandwidth Statistics for the Past 8 Seconds (t-8 to t-1)

This field displays the bandwidth statistics (in bps) for the past one to eight seconds. For example, t-1
means one second ago.

Update Period
(seconds)

Enter the time interval in seconds to define how often the information should be
refreshed.

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 652

Reviews:

ZyXEL Communications Prestige 652, User Manual, Page: 249 / 521

Search results

Summary of Contents for Prestige 652

Reviews: