ZyXEL Communications Prestige 652 User Manual Download Page 350

Page: 350 / 521

Prestige 652 Series User’s Guide

33-2

Enabling

the

Firewall

Figure 33-1 Menu 21.2 Firewall Setup

Use the web configurator or the command interpreter to configure the firewall

rules.

Menu 21.2 - Firewall Setup

The firewall protects against Denial of Service (DOS) attacks when

it is active. The default Policy sets

1. allow all sessions originating from the LAN to the WAN and

2. deny all sessions originating from the WAN to the LAN

You may define additional Policy rules or modify existing ones but

please exercise extreme caution in doing so

Active: Yes

LAN-to-WAN Set Name: ACL Default Set

WAN-to-LAN Set Name: ACL Default Set

Please configure the Firewall function through Web Configurator.

Press ENTER to Confirm or ESC to Cancel:

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 652

Reviews:

ZyXEL Communications Prestige 652, User Manual, Page: 350 / 521

Search results

Summary of Contents for Prestige 652

Reviews: