ZyXEL Communications Prestige 652 User Manual Download Page 128

Page: 128 / 521

Prestige 652 Series User’s Guide

9-2

Dynamic DNS Setup

Figure 9-1 DDNS

The following table describes the fields in this screen.

Table 9-1 DDNS

LABEL DESCRIPTION

Active

Select this check box to use dynamic DNS.

Service Provider

Select the name of your Dynamic DNS service provider.

Host Names

Type the domain name assigned to your Prestige by your Dynamic DNS provider.

E-mail Address

Type your e-mail address.

User

Type your user name.

Password

Type the password assigned to you.

Enable Wildcard

Select the check box to enable DYNDNS Wildcard.

Apply

Click

Apply

to save your changes back to the Prestige.

Cancel

Click

Cancel

to return to the previously saved settings.

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 652

Reviews:

ZyXEL Communications Prestige 652, User Manual, Page: 128 / 521

Search results

Summary of Contents for Prestige 652

Reviews: