ZyXEL Communications Prestige 652, User Manual, Page: 319 / 521

Prestige 652 Series User’s Guide
Remote Node Configuration 29-9
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that
blocks NetBIOS packets. Include this in the call filter sets if you want to prevent NetBIOS packets from
triggering calls to a remote node.
Figure 29-5 Menu 11.5 Remote Node Filter (RFC 1483 or ENET Encapsulation)
Figure 29-6 Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation)
29.5 Editing ATM Layer Options
Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options .
In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR] to select
Yes . Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options .
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL: