ZyXEL Communications Prestige 652, User Manual, Page: 473 / 521

Prestige 652 Series User’s Guide
Example Internal SPTGEN Screens G-15
150000046 = SUA Server #10 Local IP address = 0.0.0.0
150000047 = SUA Server #11 Active <0(No) | 1(Yes)> = 0
150000048 = SUA Server #11 Protocol <0(All)|6(TCP)|17(U
DP)> = 0
150000049 = SUA Server #11 Port Start = 0
150000050 = SUA Server #11 Port End = 0
150000051 = SUA Server #11 Local IP address = 0.0.0.0
150000052 = SUA Server #12 Active <0(No) | 1(Yes)> = 0
150000053 = SUA Server #12 Protocol <0(All)|6(TCP)|17(U
DP)> = 0
150000054 = SUA Server #12 Port Start = 0
150000055 = SUA Server #12 Port End = 0
150000056 = SUA Server #12 Local IP address = 0.0.0.0
/ MENU 21 FILTER SET #1 (SMT MENU 21)
FIN FN PVA INPUT
210100001 = Filter Set 1, Name <Str> =
/ MENU 21.1.1.1 FILTER SET #1, RULE #1 (SMT MENU 21.1.1.1)
FIN FN PVA INPUT
210101001 = IP Filter Set 1,Rule 1 Type <2(TCP/IP)> = 2
210101002 = IP Filter Set 1,Rule 1 Active <0(No)|1(Yes)> = 1
210101003 = IP Filter Set 1,Rule 1 Protocol = 6
210101004 = IP Filter Set 1,Rule 1 Dest IP address = 0.0.0.0
210101005 = IP Filter Set 1,Rule 1 Dest Subnet
Mask = 0
210101006 = IP Filter Set 1,Rule 1 Dest Port = 137
210101007 = IP Filter Set 1,Rule 1 Dest Port Comp <0(none)|1(equal)|2(
not equal)| 3(less)|
4(greater)>
= 1
210101008 = IP Filter Set 1,Rule 1 Src IP address = 0.0.0.0
This value must be
between 0-255.
This value must be
between 0-65535.
You may
change
this type
using
SMT
menus
only.
You may
configure
up to 12
filter sets
with SMT
menus;
one with
Internal
SPTGEN.