ZyXEL Communications Prestige 652, User Manual, Page: 502 / 521

Prestige 652 Series User’s Guide
J-4 Log Descriptions
Chart J-5 Access Logs
LOG MESSAGE DESCRIPTION
Firewall default
policy (Protocol,
Direction)
Access matched the default policy and the Prestige blocked or
forwarded it according to the configuration of the default firewall
policy.
Firewall rule match
(Protocol, Direction,
Rule)
Access matched a firewall rule and the Prestige blocked or forwarded
it according to the rule’s configuration.
Firewall rule NOT
match: (Protocol,
Direction, Rule)
Access did not match a firewall rule and the Prestige logged it.
dest port (Protocol,
Direction)
Access did not match a firewall rule’s destination port and the
Prestige logged it.
src port (Protocol,
Direction)
Access did not match a firewall rule’s source port and the Prestige
logged it.
dest IP (Protocol,
Direction)
Access did not match a firewall rule’s destination IP address and the
Prestige logged it.
src IP (Protocol,
Direction)
Access did not match a firewall rule’s source IP address and the
Prestige logged it.
protocol (Protocol,
Direction)
Access did not match a firewall rule’s protocol and the Prestige
logged it.
Triangle route packet
forwarded (Protocol)
The firewall allowed a triangle route session to pass through.
ICMP Source Quench The Prestige sent or received an ICMP source quench packet to tell a
host to slow down data transmission.
ICMP Time Exceed The Prestige sent or received an ICMP Time Exceed packet because
a packet with zero Time To Live (TTL) was dropped.
ICMP Destination
Unreachable
The Prestige sent or received an ICMP Destination Unreachable
packet when a packet was dropped because the target port was not
open.
Packet without a NAT
table entry blocked
(Protocol)
The router blocked a packet that did not have a corresponding NAT
table entry.