ZyXEL Communications Prestige 652 User Manual Download Page 50

Page: 50 / 521

Prestige 652 Series User’s Guide

2-2

Introducing the Web Configurator

Figure 2-1 Password Screen

Step 6.

You should now see the

SITE MAP

screen.

The Prestige automatically times out after five minutes of inactivity. Simply log

back into the Prestige if this happens to you.

2.3 Navigating the Prestige Web Configurator

The following summarizes how to navigate the web configurator from the

SITE MAP

screen. Screens vary

slightly for different Prestige models.

Select a language from the

Language

drop-down list box.

Click

Wizard Setup

to begin a series of screens to configure your Prestige for the first time.

Click a link under

Advanced Setup

to configure advanced Prestige features.

Click a link under

Maintenance

to see Prestige performance statistics, upload firmware and back up,

restore or upload a configuration file.

Click

Site Map

to go to the

Site Map

screen.

Click

Logout

in the navigation panel when you have finished a Prestige management session.

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 652

Reviews:

ZyXEL Communications Prestige 652, User Manual, Page: 50 / 521

Search results

Summary of Contents for Prestige 652

Reviews: