ZyXEL Communications Prestige 652, User Manual, Page: 307 / 521

Prestige 652 Series User’s Guide
Internet Access 28-5
28.6 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information.
Use the Internet Account Information table in the Compact Guide/Read Me First/Quick Start Guide to
record your. Note that if you are using PPPoA or PPPoE encapsulation, then the only ISP information you
need is a login name and password. You only need to know the Ethernet Encapsulation Gateway IP address
if you are using ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4 - Internet Access Setup , as shown next.
Figure 28-6 Menu 4 Internet Access Setup
The following table contains instructions on how to configure your Prestige for Internet access.
Table 28-2 Menu 4 Internet Access Setup
FIELD DESCRIPTION EXAMPLE
ISP’s Name Enter the name of your Internet Service Provider. This
information is for identification purposes only. ChangeMe
Encapsulation
Press [
SPACE BAR
] to select the method of encapsulation
used by your ISP. Choices are PPPoE , PPPoA , RFC 1483 or
ENET ENCAP .
ENET ENCAP
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel: