ZyXEL Communications Prestige 652, User Manual, Page: 186 / 521

Prestige 652 Series User’s Guide
17-2 VPN Screens
Table 17-1 AH and ESP
ESP AH
Select DES for minimal security and 3DES for maximum.
Select NULL to set up a tunnel without encryption.
Select MD5 for minimal security and SHA-1 for
maximum security.
DES (default)
Data Encryption Standard (DES) is a widely used method
of data encryption using a private (secret) key. DES
applies a 56-bit key to each 64-bit block of data.
MD5 (default)
MD5 (Message Digest 5) produces a 128-bit
digest to authenticate packet data.
3DES
Triple DES (3DES) is a variant of DES, which iterates
three times with three separate keys (3 x 56 = 168 bits),
effectively doubling the strength of DES.
SHA1
SHA1 (Secure Hash Algorithm) produces a
160-bit digest to authenticate packet data.
17.3 My IP Address
My IP Address is the WAN IP address of the Prestige. If this field is configured as 0.0.0.0, then the Prestige
will use the current Prestige WAN IP address (static or dynamic) to set up the VPN tunnel. The Prestige has
to rebuild the VPN tunnel if the
My IP Address changes after setup.
17.4 Secure Gateway Address
Secure Gateway Address is the WAN IP address or domain name of the remote IPSec router (secure
gateway).
If the remote secure gateway has a static WAN IP address, enter it in the
Secure Gateway Address field.
You may alternatively enter the remote secure gateway’s domain name (if it has one) in the Secure Gateway
Address field.
You can also enter a remote secure gateway’s domain name in the
Secure Gateway Address field if the
remote secure gateway has a dynamic WAN IP address and is using DDNS. The Prestige has to rebuild the
VPN tunnel each time the remote secure gateway’s WAN IP address changes (there may be a delay until the
DDNS servers are updated with the remote gateway’s new WAN IP address).
17.4.1 Dynamic Secure Gateway Address
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter 0.0.0.0 as the
secure gateway’s address. In this case only the remote secure gateway can initiate SAs. This may be useful