Home
/
ZyXEL Communications
/
Prestige 652
/
User Manual

ZyXEL Communications Prestige 652, User Manual, Page: 242 / 521

Share

Page: 242 / 521

ZyXEL Communications Prestige 652 User Manual Download Page 242

Prestige 652 Series User’s Guide

21-10

Bandwidth Management

Figure 21-7 Bandwidth Manager: Summary

The following table describes the labels in this screen.

Table 21-2 Bandwidth Manager: Summary

LABEL DESCRIPTION

LAN
WLAN
WAN

These read-only labels represent the physical interfaces.

Active

Select an interface’s check box to enable bandwidth management on that interface.

Speed (kbps)

Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.

This appears as the bandwidth budget of the interface’s root class (see

section

21.9

).

The recommendation is to set this speed to match what the interface’s connection can
handle. For example, set the WAN interface speed to 1000 kbps if the ADSL
connection has an upstream speed of 1000 kbps.

«
...
240
241
242
243
244
...
»

Summary of Contents for Prestige 652










































































































































































































































































































































































































































































































































Reviews:

No comments