ZyXEL Communications Prestige 652, User Manual, Page: 416 / 521

Prestige 652 Series User’s Guide
40-2 Remote Management
Enter 11, from menu 24, to display Menu 24.11 — Remote Management Control (shown next).
Figure 40-1 Menu 24.11 Remote Management Control
The following table describes the fields in this menu.
Table 40-1 Menu 24.11 Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server
SNMP Service Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
Port This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management. 23
Access Select the access interface (if any) by pressing the [SPACE BAR].
Choices are:
LAN only , WAN only , All or Disable . The default is
LAN only .
LAN only
Secured Client IP The default 0.0.0.0 allows any client to use this service to remotely
manage the Prestige. Enter an IP address to restrict access to a
client with a matching IP address. 0.0.0.0
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
Menu 24.11 - Remote Management Control
TELNET Server:
Server Port = 23 Server Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21 Server Access = LAN only
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80 Server Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service:
Server Port = 161 Server Access = ALL
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: