ZyXEL Communications Prestige 652, User Manual, Page: 287 / 521

Prestige 652 Series User’s Guide
Menu 2 WAN Backup Setup 25-9
Table 25-6 Menu 11.1 Remote Node Profile (Backup ISP)
FIELD DESCRIPTION EXAMPLE
Authen This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP / PAP - Your Prestige will accept either CHAP or PAP when
requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Pri Phone #
Sec Phone #
Enter the first (primary) phone number from the ISP for this remote
node. If the Primary Phone number is busy or does not answer, your
Prestige dials the Secondary Phone number if available. Some areas
require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as
required.
Edit PPP
Options Move the cursor to this field and use the space bar to select [Yes] and
press [Enter] to edit the PPP options for this remote node. This brings
you to Menu 11.2 - Remote Node PPP Options (see
section 25.7 ).
No
(default)
Rem IP Addr Leave the field set to 0.0.0.0 (default) if the remote gateway has a
dynamic IP address. Enter the remote gateway’s IP address here if it
is static. 0.0.0.0
(default)
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes
and press [ENTER] to go to M enu 11.3 - Remote Node Network
Layer Options . See section 25.8 for more information.
No
(default)
Edit Script
Options
Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT
script for the dial backup remote node ( Menu 11.4 - Remote Node
Script ). See section 25.9 for more information.
No
(default)
Telco Option
Allocated
Budget
Enter the maximum number of minutes that this remote node may be
called within the time period configured in the
Period field. The default
for this field is 0 meaning there is no budget control and no time limit
for accessing this remote node.
0
(default)
Period(hr) Enter the time period (in hours) for how often the budget should be
reset. For example, to allow calls to this remote node for a maximum
of 10 minutes every hour, set the
Allocated Budget to 10 (minutes)
and the Period to 1 (hour).
0
(default)