![background image](http://html1.mh-extra.com/html/zeiss/axioskop-40/axioskop-40_operating-manual_3382221097.webp)
Axioskop 40
OPERATION
Axioskop 40 FL
Illumination and contrast procedures
Carl Zeiss
B 40-810 e 12/01
3-23
(4)
Setting the height stop on the
condenser carrier
•
Undo the fastening screw of height stop
(3-19/
1
) using an SW 3 ball-headed screwdriver.
•
Use focusing drive to focus on the specimen.
•
Close luminous-field diaphragm and focus via
the height adjustment control (3-19/
2
) of the
condenser.
•
Carefully raise the condenser slightly without
lifting the specimen.
•
Tighten fastening screw (3-19/
1
) on the height
adjustment.
Fig. 3-19
Setting the height stop on the
condenser carrier
Summary of Contents for Axioskop 40
