![background image](http://html1.mh-extra.com/html/zeiss/axioskop-40/axioskop-40_operating-manual_3382221062.webp)
START-UP
Axioskop 40
Carl Zeiss
Attachments and conversions
Axioskop 40 FL
2-32
B 40-810 e 12/01
b)
Adjusting the y direction
•
Hold the y drive knob (2-37/
7
) and turn the light knurled sleeve (2-37/
8
) above it clockwise right
(sluggish action) or counterclockwise (easy action) until the desired torque is achieved.
•
Replace the additional sleeves when necessary and tighten the clamping screws.
☞
To ensure the stage’s long service life, remove the build-up from the carrier plate at regular
intervals. Make sure that the build-up does not get into the guiding components for x
adjustment.
(6)
Changing the specimen holder on the
mechanical stages 000000-1046-520,
000000-1067-325, 000000-1063-835,
000000-1063-836
•
Undo the two slotted screws (2-38/
1
) using a
screwdriver (2-38/
3
).
•
Remove specimen holder (2-38/
2
) from the
mechanical stage (2-38/
4
) upwards.
•
Attach desired specimen holder (2-38/
5
) to the
mechanical stage and tighten the two slotted
screws.
☞
For technical reasons no other
specimen holder than the specimen
holder for one-handed operation
000000-1132-489 can be attached
to the mechanical stage 000000-
1104-300.
Fig. 2-38
Changing the specimen holder
Summary of Contents for Axioskop 40
