START-UP
Axioskop 40
Carl Zeiss
Attachments and conversions
Axioskop 40 FL
2-28
B 40-810 e 12/01
2.2.8
Mechanical stage with torque
setting
The Axioskop 40 / 40 FL stand is delivered with a
factory-installed mechanical stage with torque
setting. The specimen holder with single-handed
operation is attached to the standard mechanical
stage (000000-1104-300). Travel range and torque
for the x and y setting can be individually varied.
(1)
Setting travel range on the stage drive
The travel range of the x and y drives can be
changed within a range of approx. 15 mm by
moving the designated drive knob (2-33/
4
or
1
).
(2)
Setting the torque for the x/y drive
knobs on the mechanical stage
The torque for the drive knobs is set to an average
value at the factory. The setting can be changed as
follows:
a)
X drive
•
Push drive knob for x adjustment (2-33/
4
) all the way down.
•
Remove the enclosed adjustment pin (2-33/
5
) from the drive knob for y adjustment (2-33/
1
) and place
it into one of the holes in the bottom nut (2-33/
3
).
•
Hold the drive knob for x adjustment (2-33/
4
) and turn the nut with the adjustment pin clockwise
(lesser torque: -) or counterclockwise (greater torque: +) until the desired adjustment is reached (refer
to Fig. 2-33).
•
Do not adjust by more than
one
complete rotation.
b)
Y drive
•
Push the drive knob for y adjustment (2-33/
1
) all the way up.
•
Place adjustment pin (2-33/
5
) into one of the openings in the top nut (2-33/
2
).
•
Hold the drive knob for y adjustment (2-33/
1
) and turn the nut with the adjustment pin clockwise
(lesser torque: -) or counterclockwise (greater torque: +) until the desired adjustment is reached.
•
Do not adjust by more than
one
complete rotation.
•
Place the adjustment pin back into the drive knob for y adjustment (2-33/
1
).
Fig. 2-33
Setting the torque
Summary of Contents for Axioskop 40
