![background image](http://html1.mh-extra.com/html/zeiss/axioskop-40/axioskop-40_operating-manual_3382221052.webp)
START-UP
Axioskop 40
Carl Zeiss
Attachments and conversions
Axioskop 40 FL
2-22
B 40-810 e 12/01
2.2.5
Attaching overview adapter
•
Where necessary, remove the filter mount or
polarizer from the condenser carrier.
•
Hold overview adapter (2-27/
4
) parallel to the
bottom of the condenser carrier (2-27/
3
) and
screw in holding pin (2-27/
6
) of the overview
adapter with angled adjusting lever (2-27/
7
)
into the front threaded hole to the left below
the condenser carrier (2-27/
3
) as far as it will
go.
•
Screw in stop bolt (2-27/
2
) with adjusting lever
(2-27/
1
) as far as it will go into the rear
threaded hole of condenser carrier (2-27/
3
).
Centering the overview adapter
•
Swivel overview adapter into the beam path.
Take care to ensure that it is properly engaged.
•
Open the aperture and luminous-field
diaphragm completely.
•
Reset the two adjusting screws (2-27/
5
) with
two Allen screwdrivers (SW 1.5) until the field
of view is optimally illuminated.
Fig. 2-27
Attaching overview adapter
Summary of Contents for Axioskop 40
