START-UP
Axioskop 40
Carl Zeiss
Attachments and conversions
Axioskop 40 FL
2-34
B 40-810 e 12/01
2.2.11
Attaching Axioskop connector
plate
The Axioskop connector plate is used to attach
intermediate tubes and/or tubes from Axioplan 2
to the Axioskop 40 / Axioskop 40 FL.
•
Use a SW 3 ball-headed screwdriver to undo
clamping screw (2-40/
5
) and remove the
Axioskop 40 / 40 FL tube upwards.
•
Insert the Axioskop connector plate (2-40/
3
)
with the dovetail on the bottom into the stand
opening (2-40/
6
) and slightly tighten clamping
screw (2-40/
5
).
•
Insert fastening screw (2-40/
2
) into the
countersunk hole of the connector plate
(2-40/
3
) and screw it into the drilled hole
(2-40/
4
) on the stand.
•
Tighten clamping screw (2-40/
5
) and fastening
screw (2-40/
2
).
•
Attach desired intermediate tube and/or tube
(2-40/
1
) of the Axioplan 2 to the connector
plate and clamp it in place using a screw
(2-40/
7
).
•
Insert eyepieces with field number 23 into the
Axioplan 2 tube (2-40/
1
).
Fig. 2-40
Attaching Axioskop connector plate
Summary of Contents for Axioskop 40
