Axioskop 40
START-UP
Axioskop 40 FL
Initial start-up
Carl Zeiss
B 40-810 e 12/01
2-11
2.1.9
Connecting to power
•
Connect microscope socket (2-10/
2
) to a power
outlet via a cable. The microscope can be
connected to a voltage between 100 and 240
VAC, 50…60 Hz. The power unit is set
automatically
to the line voltage available
within this range.
•
The HBO 100 illuminator (for epi-fluorescence)
receives power from a separate transformer.
The HBO 100 W transformer must be
connected to a power outlet via its power
socket (2-11/
2
) (only for the Axioskop 40 FL).
2.1.10
Switching the microscope and
HBO 100 W transformer on and off
•
Switch the microscope on and off using power
switch (2-10/
1
).
•
For the Axioskop 40 FL, switch the HBO 100 W
transformer on and off using the power switch
(2-11/
1
).
Fig. 2-10
Axioskop 40
Fig. 2-11
HBO 100 W transformer
(front and back)
Summary of Contents for Axioskop 40
