Axioskop 40
START-UP
Axioskop 40 FL
Attachments and conversions
Carl Zeiss
B 40-810 e 12/01
2-21
2.2.3
Attaching filter mount
•
If necessary, remove the polarizer or overview
adapter from the condenser carrier.
•
Hold filter mount (2-25/
5
) parallel to the
bottom of the condenser carrier (2-25/
3
) and
screw holding pin (2-25/
4
) of filter mount
(2-25/
5
) into the front threaded hole to the left
below the condenser carrier (2-25/
3
) as far as it
will go using the SW 2 angled Allen key
(2-25/
6
).
•
Use adjusting lever (2-25/
1
) to screw stop bolt
(2-25/
2
) into the rear threaded hole of the
condenser carrier as far as it will go.
•
Different filters (32 mm) can be inserted in the
filter mount, e.g. the white-balance filter. If
only one filter is to be used, this can be placed
directly on the luminous field diaphragm.
2.2.4
Attaching polarizer D
•
Where necessary, remove the filter mount or
overview adapter from the condenser carrier.
•
Hold polarizer (2-26/
6
) parallel to the bottom of
the condenser carrier (2-26/
3
) and screw in
holding pin (2-26/
4
) of the polarizer (2-26/
6
)
with angled adjusting lever (2-26/
5
) into the
front threaded hole to the left below the
condenser carrier (2-26/
3
) as far as it will go.
•
Screw in stop bolt (2-26/
2
) with adjusting lever
(2-26/
1
) as far as it will go into the rear
threaded hole of the condenser carrier (2-26/
3
).
Fig. 2-25
Attaching the filter mount
Fig. 2-26
Attaching polarizer D
Summary of Contents for Axioskop 40
