Axioskop 40
OPERATION
Axioskop 40 FL
Operation controls for accessory components
Carl Zeiss
B 40-810 e 12/01
3-17
Ergonomic binocular phototube 6-25°/23
(100/100)
The camera port (3-13/
1
) of the ergonomic
binocular phototube enables SLR-cameras,
microscope cameras and video cameras to be
attached via the corresponding adapters. The light
can be directed either to the eyepieces or to the
attached camera via a push rod.
An upright, unreversed image of the specimen
appears in the binocular.
−
Push rod (3-13/
2
) pushed in:
100 % of the light to the eyepieces
−
Push rod (3-13/
2
) pulled out:
100 % of the light to the camera
−
To set the best ergonomic viewing angle, swivel
the binocular component (see Fig. 3-13) up or
down.
−
The interpupillary distance can be changed by
separate adjustment of the two eyepiece tubes
−
The viewing angle can be changed by swiveling
the eyepiece tubes up (3-14/
A
) or down
(3-14/
B
).
1
2
Fig. 3-13
Ergonomic binocular phototube
Fig. 3-14
Setting viewing height on the
binocular tube
Summary of Contents for Axioskop 40
