Axioskop 40
START-UP
Axioskop 40 FL
Initial start-up
Carl Zeiss
B 40-810 e 12/01
2-7
Inserting the fold-over eyecups
The eyepieces have a rubber eyeglass protection ring to prevent scratches on spectacles. The eyepieces
can be replaced with fold-over eyecups when required.
•
Remove the eyeglass protection ring (2-4/
2
) from the eyepieces and insert the eyecups (2-4/
1
).
The eyeglass protection rings are set very tightly in the eyepiece groove, so you may need a blunt object
to prod them off.
2.1.4
Setting interpupillary distance of
the binocular tube
•
The eyepiece distance is coordinated with your
individual interpupillary distance by swinging
the eyepiece tubes symmetrically toward one
another (Fig. 2-5).
The interpupillary distance is correct when you see
only
one
round image when you look through the
two eyepieces!
2.1.5
Setting the viewing height
•
The viewing height can be adjusted to
individual requirements by swiveling the
eyepiece tubes up (2-6/
A
) or down (2-6/
B
).
The viewing height also can be changed on the
ergonomic binocular phototube (452342-0000-
000), by adjusting the viewing angle infinitely
variably within a range from 6 to 25°.
The ergo-(photo)tubes (000000-1104-293 and
000000-1104-296) are equipped with continuous
height adjustment in the range of 50 mm.
Fig. 2-5
Setting the interpupillary distance
of the binocular tube
Fig. 2-6
Setting the viewing height of the
binocular tube
Summary of Contents for Axioskop 40
