![background image](http://html1.mh-extra.com/html/zeiss/axioskop-40/axioskop-40_operating-manual_3382221009.webp)
Axioskop 40
INTRODUCTION
Axioskop 40 FL
Notes on instrument safety
Carl Zeiss
B 40-810 e 12/01
0-9
The Axioskop 40
and Axioskop 40 FL microscopes, including original accessories, may only be used for
the microscope techniques described in this manual.
Particular attention must be paid to the following warnings:
The manufacturer cannot assume any liability for any other applications, including individual
modules or single parts. This also applies to all service or repair work that is not carried out by
authorized service personnel. All warranty claims shall be forfeited.
The power plug must be inserted in an outlet featuring a grounding (earth) contact. The
grounding effect must not be made ineffective by an extension cable that does not have a
protective ground wire.
If it is determined that protection measures are no longer effective, the instrument must be
switched off and safeguarded against inadvertent operation. Please contact a Zeiss service
agency or the Carl Zeiss Microscopy Service to repair the instrument.
☞
The power supply integrated in the stands of the microscopes enables line voltages to be used
in the range between 100 and 240 V ±10 %, 50 / 60 Hz, without the voltage on the
instrument having to be changed.
The transformers for the HBO 103 (ebq 100 dc) or XBO 75 (ebx 75 isolated) are designed for
the 100 to 240 V AC, 50 to 60 Hz range. They adapt automatically to the available line voltage.
There is no need to change the voltage.
However, the transformer for the HBO 50 must be set manually to the correct voltage (100,
110, 120, 127 or 230, 240 V), and the correct frequency must be preselected (50 or 60 Hz).
Before switching on the instrument, check as to whether it is suitable for the given line voltage.
Always disconnect the instrument from the power outlet before opening the instrument and
before changing the fuses.
Take sure to ensure you only use fuses of the rated power required. Use of makeshift fuses and
short-circuiting of the fuse holders are not permitted.
Summary of Contents for Axioskop 40
