8-6
IM 703155-01E
• Offset Voltage (Y Offset)
You can set separate offset voltages for I and Q on the display. This is not the same
as the offset voltage described in section 5.4 which changes the voltage level of the
output waveform.
Selectable range: –5.00 to 5.00 V (in 0.01 V steps)
Default value: 0.00 V
1.00 V/Div
0.00 V
0.00 V
Y Axis/Div
Y Offset
Y Position
1.00 V/Div
–2.00 V
0.00 V
0.500 V/Div
–2.00 V
0.00 div
Vertical position
mark
Ground level
mark
• Voltage Level per Grid (Y Axis/Div)
You can set the voltage level per grid of I and Q on the display.
Selectable range: 0.01 to 1.00 V (in 0.01 V steps)
Default value: 0.3 V
1Div = 1.00 V
1Div = 0.50 V
When Y Axis/Div is changed from 1.00 V to 0.50 V
Vertical position
mark
Ground level
mark
• Vertical Axis Auto Scale (Y Axis Auto Scale)
The vertical scale is set so that the maximum and minimum values of the waveform
data in the vertical direction fit on the waveform display frame.
• Horizontal Position (X Position)
You can specify the range of data points to be displayed. Set the data point value to
be displayed at the left edge of the waveform display frame.
Selectable range: 0 to 1999999 points (in 1 point steps)
However, the waveform is displayed up to the data length of the waveform data.
Default value: 0 point
(When the data length per grid
(X Axis/Div) is 10 points)
Data length within the waveform display frame
Data length of the waveform data
20 points
(X Position)
120 points
8.1 Waveform Display