YOKOGAWA VB8300, User Manual

Page: 70 / 221

7-3
IM 703155-01E
Editing Sequences
7
7.2 Sequence Editing and Loading Waveform Data
to the Waveform Memory
Procedure
To exit the menu during operation, press ESC located above
the soft keys.
In the procedural explanation below, the phrase “ rotary knob
& SELECT ” and “ numeric keys & ENTER ” may be used.
These phrases indicate procedures for selecting/setting items
and entering values, character strings, and units. For details
on the procedure, see section 3.7 or 3.8.
BACK
SPACE
DISPLAY
ON/OFF
KEY
LOCK
INITIALIZE
HDD
OPTION
PRINT
MISC
FILE CLOCK
MANUAL
TRIG
WAVE SEQ TRIG DISP
OUT 1 OUT 2 OUT 3 OUT 4
REMOTE
UNLOCK
OFF
PRESET
SHIFT
This section assumes that the sequence list data is loaded in the VB8300. The
procedure starts with the display that appears when the sequence list is loaded as
explained in section 7.1.
If the sequence list is not loaded or if the sequence list has not been created, the Element No.
1 box of the sequence list displays only the words “(Go to Top).”
Sequence editing consists of several setup procedures: editing the element, editing the
sequence list, and editing the sequence lists of all output terminal sets. For a description
of each item, see the respective page in the table below. For the procedure of loading
the waveform data to the waveform memory according to the sequence list after editing
the sequence, see page 7-8.
Item Procedural Explanation Page
Editing the element Page 7-4
Editing the sequence trigger (option) Page 7-7
Editing the sequence list Page 7-8
Editing the Sequence Lists of All Output Terminal Sets Page 7-9
Sending (Loading) Waveform Data to the Waveform Memory Page 7-9