YOKOGAWA VB8300 User Manual Download

Page: 3 / 221

IM 703155-01E

1st Edition : August 2004 (YK)

Thank you for purchasing the VB8300 Baseband Signal Generator.

This user’s manual contains useful information about the instrument’s functions and

operating procedures and lists the handling precautions of the VB8300. To ensure

correct use, please read this manual thoroughly before beginning operation. After

reading the manual, keep it in a convenient location for quick reference whenever a

question arises during operation.

Three manuals, including this one, are provided as manuals for the VB8300. Please

read all of them.

Manual Title

Manual No.

Description

VB8300 Baseband Signal

IM 703155-01E

This manual. Explains all functions and

Generator User’s Manual

procedures of the VB8300 excluding the
communication functions.

VB8300 Baseband Signal

IM 703155-17E

Explains the communication functions for

Generator Communication

controlling the VB8300 using communication

Interface User’s Manual

commands.

VB8300 File Conversion

IM 703155-61E

Explains how to use the software utility that

Utility Software User’s

creates waveform data or converts files into

Manual

data that the VB8300 can use.

Note

• The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions. The figures

given in this manual may differ from those that actually appear on your screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA dealer as listed on the back cover of this manual.

• Copying or reproducing all or any part of the contents of this manual without the

permission of Yokogawa Electric Corporation is strictly prohibited.

• This product includes open source software. For the procedure of obtaining the

source code, contact your nearest YOKOGAWA dealer.

Trademarks

• Microsoft, Internet Explorer, MS-DOS, Windows, Windows NT, and Windows XP are

either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

• Linux is either a registered trademark or trademark of Linus Torvalds in the United

States and/or other countries.

• Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of

Adobe Systems Incorporated.

• CompactFlash and CF are registered trademarks of SanDisk Corporation.

• For purposes of this manual, the TM and



symbols do not accompany their

respective trademark names or registered trademark names.

• Other company and product names are trademarks or registered trademarks of their

respective companies.

Revisions

• 1st edition:

August, 2004

Summary of Contents for VB8300






























































































































































































































Search results

Summary of Contents for VB8300

Reviews:

Related manuals for VB8300

Brands by name

Popular brands

YOKOGAWA VB8300, User Manual

Search results

Summary of Contents for VB8300

Reviews:

Related manuals for VB8300

Brands by name

Popular brands