4-4
IM 703155-01E
4.2
Uploading Waveform Data from the CF Card or
USB Memory
Procedure
To exit the menu during operation, press
ESC
located above
the soft keys.
In the procedural explanation below, the phrase “
rotary knob
& SELECT
” and “
numeric keys & ENTER
” may be used.
These phrases indicate procedures for selecting/setting items
and entering values, character strings, and units. For details
on the procedure, see section 3.7 or 3.8.
BACK
SPACE
DISPLAY
ON/OFF
KEY
LOCK
INITIALIZE
HDD
OPTION
MISC
FILE
CLOCK
MANUAL
TRIG
WAVE
SEQ
TRIG
DISP
OUT 1
OUT 2
OUT 3
OUT 4
REMOTE
UNLOCK
OFF
PRESET
SHIFT
Before carrying out the procedures in this section, a CF card or USB memory
containing waveform data must be inserted in the VB8300. For the procedure of
inserting/removing the CF card or USB memory, see section 10.1.
1.
Press
WAVE
. The Wave menu appears.
2.
Press the
Load
soft key. The Load File dialog box opens.
3.
Turn the
rotary knob
to select compact/ (or usbmem/).
4.
Press
SELECT
twice quickly. The data on the CF card (or USB memory) is displayed.
5.
Turn the
rotary knob
and select the waveform data file to be loaded to the
waveform memory or the sequence list file in which the file names of the
waveform data to be loaded to the waveform memory are registered. The name
of the selected file appears in the entry box.
6.
Press
SELECT
to confirm. The cursor moves to the entry box.
To cancel the operation, press
RESET
. When cancelled, the cursor moves to the file
list display area.
7.
After confirming the selection in step 5 and 6, press
SELECT
again. The
waveform data of the selected file is loaded to the waveform memory.
Indicates the directory of the file shown. The display here does
not change even if you change the directory to be shown.
To move to a higher level directory, select here and
then press the SELECT key twice quickly.
If you select compact/ (or usbmem/) and press the SELECT key twice
quickly, the data on the CF card (or USB memory) is displayed.
File list display area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed. In the case of
the USB memory, /usbmem is
displayed.
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
List of files and directories in the directory