Yealink SIP-21P E2 User Manual Download Page 14

Page: 14 / 156

User Guide for the SIP-T21(P) E2 IP Phone

Icon

Description

Call Mute

Received Calls

Placed Calls

Missed Calls

Recording box is full

A call cannot be recorded

Recording starts successfully

Recording cannot be started

Recording cannot be stopped

The contact icon

Power Indicator LED

LED Status

Description

Solid red

The phone is initializing.

Fast flashing red (300ms)

The phone is ringing.

Slow flashing red (1s)

The phone receives a voice mail or text message.

Off

The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.

Line key LED

LED Status

Description

Solid green

The line is seized.
The line is in conversation.

Fast flashing green

The line receives an incoming call.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands