Yealink SIP-21P E2 User Manual Download Page 93

Page: 93 / 156

Basic Call Features

The icon appears on the status bar and all line icons change to .

Incoming calls will be rejected automatically, and the LCD screen will prompt "n
New Missed Call(s)" ("n" indicates the number of missed calls).

To configure the DND authorized numbers via web user interface:

Click on Features->Forward & DND.

Select Enabled from the pull-down list of DND Emergency.

Enter the numbers in the DND Authorized Numbers field.

For multiple numbers, enter a comma between every two numbers.

Click Confirm to accept the change.

When DND is enabled on the phone, the phone can still receive incoming calls from
the numbers specified in the DND Authorized Numbers field.

Note

You can configure your phone to forward incoming calls to another party through static
forwarding. You can also forward calls while your phone is ringing; refer to the dynamic
forwarding.

DND authorized number is configurable via web user interface only.

When the phone receives a voice mail, the voice mail prompt window will pop up by

default, if you want to disable the feature, contact your system administrator for more
information.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands