Yealink SIP-21P E2 User Manual Download Page 98

Page: 98 / 156

User Guide for the SIP-T21(P) E2 IP Phone

1) Press or , or the Switch soft key to select Enabled from the No

Answer Forward field.

2) Enter the destination number you want to forward all unanswered incoming

calls to in the Forward to field.

3) Press or , or the Switch soft key to select the ring time to wait

before forwarding from the After Ring Time field.

The default ring time is 12 seconds.

4) (Optional.) Enter the no answer forward on code or off code respectively in

the On Code or Off Code field.

You can also enable no answer forward for all accounts. After no answer
forward was enabled for a specific account, do the following:

1) Press or to highlight the No Answer Forward field.

2) Press the All Lines soft key.

The LCD screen prompts “Copy to all lines?”.

3) Press the OK soft key to accept the change or the Cancel soft key to cancel.

Press the Save soft key to accept the change or the Back soft key to cancel.

The icon appears on the status bar, and the associated line icon changes to .

Call forward is configurable via web user interface at the path Features->Forward &
DND.

Note

You can also enter the SIP URI or IP address in the Forward to field. For more information
on using the SIP URI or IP address, refer to

Placing Calls

on page

Call forward is local to the phone, and may be overridden by the server settings. Call

forward on code or off code may be different between servers. For more information,
contact your system administrator.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands