Yealink SIP-21P E2 User Manual Download Page 87

Page: 87 / 156

Basic Call Features

Wait for the designated period of time or press the OK soft key to redial the phone

number.

The phone will retry as many times as configured until the called party is idle.

You can use call completion to notify the caller who failed to reach a desired party when
the party becomes available to receive a call.

To configure call completion via phone user interface:

Press Menu->Features->Call Completion.

Press or , or the Switch soft key to select Enabled from the Call Completion

field.

Press the Save soft key to accept the change or the Back soft key to cancel.

Call completion is configurable via web user interface at the path Features->General
Information.

To use call completion:

When the called party is busy, the following prompt will appear on the LCD screen of the
phone:

Press the OK soft key, the phone returns to the idle screen and call completion is

activated.

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands