Yealink SIP-21P E2 User Manual Download Page 86

Page: 86 / 156

User Guide for the SIP-T21(P) E2 IP Phone

You can enable auto redial to automatically redial a phone number when the called
party is busy. You can also configure the number of auto redial attempts and the time to
wait between redial attempts.

To configure auto redial via phone user interface:

Press Menu->Features->Auto Redial.

Press or , or the Switch soft key to select Enabled from the Auto Redial

field.

Enter the desired time (in seconds) in the Redial Interval field.

The default time interval is 10 seconds.

Enter the desired number of redial attempts in the Redial Times field.

The default times are 10.

Press the Save soft key to accept the change or the Back soft key to cancel.

Auto redial is configurable via web user interface at the path Features->General
Information.

To use auto redial:

When the called party is busy, the LCD screen prompts the following:

Press the OK soft key to activate auto redial. The following prompt will appear on

the LCD screen of the phone:

Summary of Contents for SIP-21P E2





























































































































































Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands

Yealink SIP-21P E2, User Manual

Search results

Summary of Contents for SIP-21P E2

Reviews:

Related manuals for SIP-21P E2

Brands by name

Popular brands